Archive

Category Archives for "Mold Testing"

$25. Discount Coupon for Mold Testing Services Rockville Maryland

To get your discount coupon on Mold Testing services in Rockville MD please visit here: https://www.mdmoldtesting.com

At the bottom of the page there is a form to get the discount coupon.

You can contact Jeff Pace directly at: 301-412-7562

Our Inspectors Locate Hidden Mold Problems

Mold inspection by a licensed mold inspector is critical to finding hidden mold in a structure. Some dishonest sellers try to hide mold with spackling or paint, or they may put up new sheetrock over moldy framing. However, mold spores cannot hide from the detection devices mold inspectors use, since microscopic mold spores make it into the air even in the absence of visible mold.

Mold inspectors consider likely sources for mold and evidence that may not be apparent to the untrained eye. Inspectors can also look at things like construction permits indicating the type of construction activities that may be used to cover up mold problems.

The mold inspection process includes :

  • A visible inspection
  • Surface sampling/testing
  • Air sampling/testing

After both the surface and air sampling are completed, they are sent off to a state of the art lab facility for further tests. Once the results are returned from the lab, the report will be analyzed by a licensed inspector.

If the report determines there is mold found in your home, the inspector will develop a mold remediation protocol. This protocol will identify the cause(s) of the mold, steps to remediate it and future precautions to take.

Various mold abatement processes are used to remove dangerous mold from homes and make them habitable. There are a few circumstances when mold abatement isn’t enough. For example, if black mold is found in a home’s framing (often caused by flood damage), it can’t be removed.

The only solution is to remove the moldy structural members and replace them. The cost for these repairs can be quite high if damage is extensive

Top 10 Mold Testing Services Rockville Maryland That Will Help You Get Rid of Your Toxic Mold!

#1 Mold Testing Service in Rockville Maryland-MD Mold Testing mdmoldtesting.com Rockville Maryland- Call 301-355-2714
4014 Fox Valley Dr, Rockville, MD 20853

We are a full service Rockville Maryland Mold Testing business with over 25 years of hands on inspection experience, same day service 7 days a week 6:00 a.m. to 11:30 p.m. daily.

Our rates for Rockville Maryland Mold Testing Services are very reasonable & our prices have not changed for over 10 years. We service Maryland, Washington D.C., Virginia, Delaware. We are licensed and insured, we accept checks, usps money orders & cash only.

We also offer environmental testing including indoor air quality, mold testing services (clearance certificates), asbestos, soil, radon, water & lead testing. If you mention this ad you will receive $25.00 OFF any test. All tests MUST be performed on the same day of home inspection.

SERVING ALL OF MONTGOMERY COUNTY & SURROUNDING AREAS INCLUDING THE DISTRICT of COLUMBIA. Maryland, Washington D.C., Delaware, Northern Virginia. We are based in Rockville Maryland.

This company is run by Jeff Pace who is offers one of the Premier Mold Testing Services in Rockville Maryland. Call 301-355-2714 to speak with Jeff personally.

#2 Mold Testing Service Rockville Maryland-02 Mold Testing Rockville Maryland

Hidden mold in your Rockville Maryland house can affect your health and your family’s health. Rockville Maryland Mold testing services can help detect if there is any black mold in your household that you can’t see. Give us a call if you need to know for sure.

Mold Testing Services In Rockville MD

If you don’t see black spots on the wall or smell a musty, mildew smell, then the only way to know for sure if there is mold in your house is by taking samples to test. We are a professional and certified Rockville Maryland mold inspection services mold inspection company that can help. Our Rockville MD mold inspection services specialists will come to your household and do an extensive inspection.

We do a visual inspection to check if there are any signs of mold, leaks, or high relative humidity. We then focus on areas of high moisture because mold grows where there is high moisture content. Our Rockville MD mold inspection services experts use moisture meters and infrared cameras to determine places of concern.

We then take samples of the surfaces and air for testing. The samples are tested in a lab that is accredited by AIHA.

| O2 Mold Testing

| Mold Testing/Inspection/Detection
Hours: Mon-Sun 8:00am – 8:00pm [map & reviews] | Phone: 301-867-5064

Nearby Locations:

Alexandria, Arlington, Bethesda, Burke, Centreville, Gaithersburg, Reston, Washington DC.

Mold Inspection Service Rockville Provides:

  • Commercial and residential mold testing
  • Fast and reliable laboratory results
  • Detailed testing reports and advice
  • Certified lab analysis
  • Mold remediation plan

#3 Mold Testing Service Rockville Maryland- We Restoration LLC – Mold Remediation & Water Damage Restoration

The DC Metro Area’s Restoration Experts

At We Restoration LLC, we offer prompt and professional restoration services for your home or business. Whether you require mold remediation, water damage repair, asbestos removal, improving your crawl space environment, or need to clean contaminated air ducts, our team of certified professionals are here to help. We understand that a fast response is crucial to prevent continued damage; that’s why we are on standby for you 24 hours a day.

#4 Mold Testing Service Rockville Maryland-Mold Removal Remediation Solutions

MOLD REMOVAL & REMEDIATION

WE ARE A CERTIFIED WATER DAMAGE, MOLD REMOVAL & REMEDIATION, FIRE AND SMOKE DAMAGE RESTORATION COMPANY WITH MANY YEARS OF EXPERIENCE IN PROVIDING FIRST CLASS CUSTOMER SERVICE AS USA INDUSTRY LEADERS.

Our services include emergency water damage repair, mold inspections and remediation, 3rd party air quality testing, asbestos removal and, smoke or fire damage restoration in Maryland,Virginia and Washington, D.C
Whatever the damage – leaks, floods, fires or accidents, we will be there to help you get your home or business professionally repaired and restored in as little time as possible. We focus on exceeding expectations by quickly and clearly identifying your needs; an essential part of how we operate, and we formulate a plan to repair and restore your home or business property to the condition it was originally in.

#5 Mold Testing Service Rockville Maryland-Water Restoration & Mold Remediation Solution

#6 Mold Testing Service Rockville Maryland-SERVPRO of Rockville and Silver Spring North

At SERVPRO of Rockville-Olney and SERVPRO of Silver Spring North, we are here for you always. We are here for you 24/7, 365 days a year when disaster strikes. Whether that is water, fire, mold, storm damage, cleaning or even biohazard! No job is too big or small. We are the experts of restoration as well as remediation with the best products and equipment. Leave the mess to us and take a look at our services on our site to see how we can help you. Our team is properly trained and certified to make a disaster on your property look “Like it never even happened.”

#7 Mold Testing Service Rockville Maryland- FDP Mold Remediation

DISINFECTING
SURFACES
MOLD
INSPECTION
MOLD
REMEDIATION
MOLD
TESTING

24/7 Emergency Service
GET ANSWERS
CONSULT WITH A SPECIALIST
FDP MOLD REMEDIATION PROFESSIONAL SERVICES

PREVENT DAMAGE TO HEALTH AND PROPERTY

We understand the severity of mold. That’s why our experts are dedicated to responding quickly when you call us for help. A fast response not only lessens property damage and reduces cost, but it also helps eliminate the possibility of serious health problems due to mold. That’s the most important benefit of all.

#8 Mold Testing Service Rockville Maryland-Clean And Shine Restoration

Water Damage

If your property has water damage it is of utmost importance that help arrive as soon as possible. Clean and Shine Restoration Technicians are available 24 hours a day, armed with the latest equipment and procedures to remove water quickly. Throughout the process we closely monitor and document the drying process to verify your property is dried properly and thoroughly. Enjoy piece of mind knowing all of our Technicians are IICRC certified in Water Damage Restoration.

#9 Mold Testing Service Rockville Maryland- Home Safe Mold Remediation LLC

#10 Mold Testing Service Rockville Maryand-Indoor Green Solutions

Over 10 Years of Experience

Here at Indoor Green Solutions, we care about you. We have more than 10 years of experience removing mold, cleaning air ducts, and water damage restoration in homes throughout Maryland, Virginia, and Washington D.C. Our highly skilled team includes technicians who have a full understanding of mold growth and effective removal solutions. With our comprehensive services and EPA approved solutions, we can restore your home to safe conditions.

For the number 1 Mold Testing company in Rockville Maryland contact Jeff Pace of MD Mold Testing at: 301-355-2714 or visit www.mdmoldtesting.com

1

How do you know if mold is behind drywall?

Most mold is unmistakable, but sometimes small or largely hidden growths just make a surface look dirty. A quick test for mold can be done when you dip a swab in diluted bleach (1 part bleach, 16 parts water) and dab it on the wall. If the spot quickly lightens (or keeps coming back after cleaning), assume it’s mold. 4014 Fox Valley Dr, Rockville, MD 20853 (301) 717-1454 http://www.mdmoldtesting.com https://www.facebook.com/MDMoldTesting/

1

Can mold be fully remediated?

The Environmental Protection Agency (EPA) notes that any moldy areas less than 10 square feet (about 3 feet by 3 feet) can be remediated by the homeowner. … In most cases, it is better to have a mold remediation contractor do the work than a general contractor. 4014 Fox Valley Dr, Rockville, MD 20853 (301) 717-1454 http://www.mdmoldtesting.com https://www.facebook.com/MDMoldTesting/
1

What are signs of mold in your house?

What are the signs of mold? It has a musty, earthy smell. There’s a nearby source of moisture, but not much light. You see warping, cracking, or peeling of whatever material it’s growing on. A drop of bleach lightens its color in a minute or two. Unchecked, mold will continue to grow. Dirt and old stains 4014 Fox Valley Dr, Rockville, MD 20853 (301) 717-1454 http://www.mdmoldtesting.com https://www.facebook.com/MDMoldTesting/

How can I tell if I have mold in my walls?

Mold can be black, green, gray, white, or brown. Mold can even appear orange, pink or purple when it grows behind vinyl wallpaper. Another sign of visible mold is discoloration of walls, even if it has been painted over. If the water damage inside the walls persists, mold will show signs on the surface. 4014 Fox Valley Dr, Rockville, MD 20853 (301) 717-1454 http://www.mdmoldtesting.com https://www.facebook.com/MDMoldTesting/

 

How is Mold Testing Done?

These samples are taken by using a pump that forces air through a collection device which catches mold spores. The sample is then sent off to a laboratory to be analyzed. InterNACHI inspectors who perform mold inspections often utilize air sampling to collect data, which has become commonplace. 4014 Fox Valley Dr, Rockville, MD 20853 (301) 717-1454 http://www.mdmoldtesting.com https://www.facebook.com/MDMoldTesting/

4 Tips to Prevent Mold This Summer

4 Tips to Prevent Mold This Summer

Home Improvement and Mold Prevention Tips By Season

Limit Indoor Moisture
Mold thrives in moist, dark environments, so the simplest thing you can do to prevent mold is to address
leaks and deal with water damage. In damp, dark areas like under sinks and in the basement, check for drips and pooled water.
Tackle leaks as soon as you find them, so you don’t give mold spores a place to call home.

Keep Humidity Under Control
Controlling airborne moisture levels is another smart way to prevent mold from thriving in your home.
Start by checking your thermostat to make sure the humidity level is below 50 percent.
If your HVAC system needs an extra boost to lower moisture levels, consider getting a portable
dehumidifier for a certain area of your house or investing in a whole-home dehumidifier that
can resolve humidity problems throughout the house.

Ventilate Your Home
If it often seems like air sits in your home without circulating in and out,
mold and moisture could be building up and creating a mold problem.
Improve ventilation by turning on exhaust fans in the bathroom and kitchen,
as these handy devices are designed to push moist air outside where it belongs.

Stick to a Cleaning Routine
A regular cleaning routine can do wonders for mold issues in your home. Vacuum, dust, and mop surfaces
and floors in your home once a week, and take care to dry any wet surfaces. This strategy gives mold fewer
opportunities to thrive and helps your home smell fresh at the same time.
Md Mold Testing
Address: 4014 Fox Valley Dr, Rockville, MD 20853
Phone: (301) 717-1454
Website: https://www.mdmoldtesting.com

More Mold Testing Tips.

3 Signs You May Have Mold in Your Rockville Maryland Home

For professional mold testing services in the Rockville Maryland Area please visit: https://www.mdmoldtesting.com MD Mold Testing 4014 Fox Valley Dr, Rockville, MD 20853
 (301) 717-1454

There are a few things shoppers should never take a seller’s word for; not necessarily because the seller is dishonest, but because they might not know about the problem.

Such is the case with mold growth, which goes undetected in many American homes.

These spores not only spread rapidly, they also cannot be completely eradicated. In other words, they are a permanent, i.e., expensive problem. The danger

The difficulty with mold is the is often grows out of sight, such as on the backside of drywall and other concealed areas that are in close to leaking pipes. Fueled by moisture, these spores multiply like gremlins and can be quite costly to remediate.

More importantly, mold can produce irritants and allergens that cause serious health problems for the home’s occupants.

Warning signs When shopping for a home, keep an eye out for the following signs: Water marks and musty odors are the most common signs, since mold and moisture are always linked Dank areas like basements that have experienced flooding or had standings water in the past Listen for leaks or dripping water in the ceilings or walls.

More tips about mold testing in Rockville Maryland.

6 Common Areas For Mold Contamination In Your Rockville Maryland Home

Read the full article here: https://www.mdmoldtesting.com/blog/mold-guide-101/

 

Mold, one of the most prolific organisms in the world, loves to hide in your home, taking up residence, and growing easier.

1. The Kitchen

2. The Bathroom

3. The Basement Or Crawl Space

4. Inside Your HVAC System

5. On the Components of Appliances

6. On Your Plumbing and Ductwork

For professional Mold Testing in the Washington D.C. Maryland area please contact Jeff Pace at:

Address: 4014 Fox Valley Dr, Rockville, MD 20853

(301) 717-1454

Website: https://www.mdmoldtesting.com

Here is an article about mold testing in the Washington D.C. Area.

Mold Testing Alexandria Virginia How do you know if mold is making you sick? (301) 717-1454

 

1 2 3